|
Post by eternal on Jul 12, 2006 0:06:31 GMT -5
Drive shaft replaced, gears adjusted to stop rubbing, brakes changed and set up , cables lubed, electrics retested, and clutch properly adjusted.
Now I just have to properly mix my fuel and I should be ready to set fire to something.
See y'all soon
|
|
|
Post by servetavin on Jul 12, 2006 0:48:02 GMT -5
Good to hear! Was the drive shaft stripped, and more importantly how many needle bearings did you have to deal with?
|
|
|
Post by peeman on Jul 12, 2006 2:24:00 GMT -5
Nice job eternal.
Now you are ready for the big rally this weekend ;D
|
|
|
Post by eternal on Jul 13, 2006 23:29:40 GMT -5
THere are 24 needle bearings and you must remove your NSU transmission in 3rd gear to stop it from falling out, in case you were wondering.
Driveshaft was broke, twizzled
|
|
|
Post by didgeridude on Jul 14, 2006 10:17:36 GMT -5
Hey Jer, If that "best engineered and built scooter in history" breaks down again, maybe you borrow one of mine for the weekend. Or, maybe Ron can let you ride a 50cc demo. It will be faster than what you're used to but you can probably handle it.
|
|